COLORZAP-93 (c) Sept.1993 by Robert Gault VR. 1.6
DRIVE:  #11   GRAN: $         TRACK:  #17         SECT:  #3        RECORD #0           LOF #0
     0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F   0 2 4 6 8 A C E
00: 54 31 37 53 31 36 20 20 42 41 53 00 00 22 00 86   T17S16  BAS.."..
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
20: 41 55 54 4F 45 58 45 43 42 41 53 00 00 20 00 2C   AUTOEXECBAS.. .,
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
40: 43 55 54 53 20 20 20 20 42 41 53 00 00 05 00 27   CUTS    BAS....'
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
60: 4D 4C 46 49 4E 44 45 52 42 49 4E 02 00 38 00 2C   MLFINDERBAS..8.,
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
80: 53 57 52 45 41 44 20 20 42 49 4E 02 00 19 00 86   SWREAD  BIN.....
90: 00 00 01 00 00 02 86 00 00 00 00 00 00 00 00 00   ................
A0: 00 55 54 45 58 45 43 20 42 41 53 00 00 43 00 13   .UTEXEC BAS..C..
B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
C0: 53 57 52 45 41 44 20 20 41 53 4D 03 FF 08 00 26   SWREAD  ASM....&
D0: 00 00 01 00 00 1C 26 00 00 00 00 00 00 00 00 00   ......&.........
E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
     0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F    1 3 5 7 9 B D F

    This is a typical screen from COLORZAP-93. A full sector is displayed in an 80 column text screen making it easy to see what is on a disk. As a directory track does not have a GRAN number none is shown but any track other than 17 will have a GRAN entry. If a file is linked to, then RECORD and LOF will display the current file sector as a record number and LOF will be the length of the file in sectors.
    Either the hexadecimal or ascii values can be changed and written to disk. The entire sector can be filled with a single value with a single command.
    The up/down arrows can be used to browse through sectors or GRAN, TRACK, or SECTOR values can be selected.
    Sectors can be copied to a new location on the same or different drive. The screen display of the current sector can be sent to a printer.
    It is possible to search an entire drive for either a hexadecimal or ascii string.

    The entire command list can be displayed on screen by entering a ? mark.